Select a category:

Questions:

Q: My PDA shows 127.8 as bearing whatever I do, it is not recording any movement.
A: Your are probably running in SIMULATION mode of our SPAA05 PDA Program. Go to Info, Options, and change the comport away from 0 , there is a detect Comport button, this should solve your problem

Q: Help, I have made measurements in TXT mode, but my customer requires the encrypted files, how can I change this.
A: Sorry to tell you but the SPAA05- PDA software can only produce encrypted files while measuring on site. You have to go back to Site...

Q: have a brand new SPAA05 NEX. Worked for 1 sector, then the bluetooth lost connection. It's asking for a pin code Also, do I need to generate a code key ???
A: Hi, It seems that you lost the Bluetooth connection while out of range. Solution is to reset the PDA, check if the BT is switched on, Switch on the SPAA05-NEX outdoor then start the SPAA05-NEX software again, no Bluetooth setup is required and the SPAA05 Program =MUST= open with the Bluetooth Browser where you should find your SPAA05 tool listed, if not ==> exit the program and go to "start, settings, connections, bluetooth, services, serial port, advanced and there you must tick the box for DEFAULT DEVICE FOR OUTGOING....... and then restart the SPAA05 program. P.S. no Pairing, not PIN , no Security are required. the SPAA05-NEX program will do all of that automatically via the Bluetooth Browser

Q: When I try to link the PDA to the unit it ask for a passcode, what would that pass code be?
A: When connecting the PDA to the SPAA05 tool you should not worry about pairing and secured connections and pin codes, just switch on the SPAA05 tool and lauch the SPAA05 software from start. The Program automatically opens the Bluetooth Browser where you can find the SPAA05 tool and easily can connect.

Q: The PDA software for the SPAA was installed incorrectly into the PDA, and I am having truble reinstalling the SPAA software into the PDA.
A: Hi Kenneth, please contact your nearest distributor who will help you with the installation process of the software. most of the time you only have to execute the 6 available .CAB files 1 by 1 and copy the two GPStools DLL files into the my device/program files/umts/spaa05 PDa folder.

Q: We have sent our unit back for repair. The problem being that I require a report off the PDA. I do have the encrypted files. Is there any way i can reproduce the Word Doc from this? Brad Whitehorne
A: You should be able to use the Universal Data-translator for this. Please look in the downloads section where a free version is available.

Submit a question: